ʻO ka mea ʻike ʻoniʻoni akamai R1
Alakaʻi hoʻomaka wikiwiki
Hōʻike huahana
The THIRDREALITY Motion Sensor R1 is the perfect companion for a smarter, more secure home. Seamlessly integrating with popular Zigbee hubs like Echo devices with built-in Zigbee hubs, SmartThings, and Home Assistant, it fits effortlessly into your existing setup. Imagine customizing its detection range from 1.5 to 9.5 meters to monitor your living room, hallway, or office just the way you need. With three AA batteries, the sensor delivers long-lasting performance up to 3 years in typical use, so you can focus on what’s important without constant maintenance. Set up routines via compatible apps to turn on lights as you enter a room or receive instant alerts when motion is detected, adding convenience and peace of mind. Whether placed discreetly on a shelf or mounted on a wall, the Motion Sensor R1 adapts to your space, keeping your home connected and secure.
Nā kikoʻī
| inoa | ʻO ka mea ʻike ʻoniʻoni akamai R1 |
| Hoʻohālike | 3RSMR01067Z |
| Anana | 2.56 iniha×1.18 iniha×2.56 iniha |
| Hana Voltage | DC 4.5V |
| ʻAno Bateri | AA battery × 3 (included) |
| Ka pinepine hana | Zigbee 3.0 : 2.4GHz, Radar : 5.8GHz |
| Kūlana Hana | Hoʻohana i loko wale nō |
| Kaulana Mahana Hana | Default 0~40 ℃ (loko) |
Detect Level & Range
| pae | Range (m/inch) |
| 1 | 1.5 / 59 |
| 2 | 3.5 / 138 |
| 3 | 5.5 / 217 |
| 4 | 7.5 / 295 |
| 5 | 9.5 / 374 |
Nā hana pihi
| Hana | Kaʻina hana | |
| Hoʻoponopono hou (+) | Hōʻike Hōʻike | E kaomi a paʻa no 10 kekona |
| Hoʻonui i ka ʻike | Kaomi hoʻokahi | |
| LED (-) | En/Disable motion detect light | E kaomi a paʻa no 3 kekona |
| E ho'ēmi i ka naʻau | Kaomi hoʻokahi |
kūlana LED
| Hana | wehewehe |
| Hana Hou | Hoʻomālamalama ʻia ka LED. |
| Hoʻolua | The LED flashes rapidly. |
| ʻIke ʻia ka ʻoni | When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second. |
| O ffline | The LED flashes once every 3 seconds. |
| Haʻahaʻa Battery | The LED flashes twice every 5 seconds. |
*The sensitivity indicator light will be reused with the status indicator light.
Hoʻonoho
- E wehe i ka uhi pākaukau ma ka hāmeʻa a wehe i ke kāʻei insulation no ka mana o ka hāmeʻa.
- Ke hoʻā ʻia ka hāmeʻa, ʻālohilohi koke ka hōʻailona sensitivity a komo ka hāmeʻa i ke ʻano pairing Zigbee. Inā ʻaʻole i loko o ke ʻano pairing ka mea ʻike, e kaomi a paʻa i ke pihi + no 10 kekona e hoʻonohonoho hou i ka mea ʻike.
- E hahai i nā ʻōlelo kuhikuhi ma ka paepae e hoʻohui i ka mea hana.
Nā Papahana Kūlike
| Papahana | Koi |
| Amazon | Echo me ka hub Zigbee i kūkulu ʻia |
| Nā mea akamai | Nā hiʻohiʻona 2015/2018, Station |
| Kokua Home | ZHA a me Z2M me Zigbee dongle |
| Habitats | Me Zigbee hub |
| ʻOiaʻiʻo ʻekolu | Smart Hub/Smart Bridge MZ1 |
| Homey | Homey Bridge/Pro |
| Aeotec | Aeotec Hub |
Using Case
- Hang or place the R1 sensor in a suitable and sturdy location. This location should be away from the wireless router and places where there may be slight vibrations (such as washing machines). If there are multiple R1 sensors, avoid overlapping sensing areas to cause false alarms.
- After completing the installation, you should first adjust the sensor’s sensitivity. There are 5 sensitivity levels from low to high, represented by numbers 1-5. Please try the sensing distance from level 3 (The default is level 3). If the sensing distance is too close, you can switch to a higher level, otherwise you should adjust to a lower level. The sensitivity and LED indicator switch can only be adjusted on the device.
- Start setting the routine. The R1 sensor is the same as the Wireless Motion sensor. You can select the R1 sensor as the trigger on the platform, and then set some switches or devices as reactors.
Ke hoʻomaka ʻia ka hāmeʻa, e hoʻomālamalama ʻia ke kukui hōʻailona no ka pae o kēia manawa no 1 kekona.
Hoʻokomo
Hōʻike ka huahana i kahi hoʻolālā anti-slip, e ʻae iā ia e kau pololei ʻia ma luna o ka papaʻaina a i ʻole e kau ʻia ma ka paia me ka hoʻohana ʻana i nā wili.
- Vertically placed on table
- Kau ma ka paia
Hoʻoponopono pilikia
To achieve the desired detection accuracy:
- Do not install the sensor on a metal surface. If you need to install it, please place a non-metallic insulating layer (e.g. plastic or rubber pad, >5mm thick) between the radar and the metal surface.
- When installing the sensor, please keep it at least 1m away from other wireless devices that will create a strong signal field (e.g. Wireless router).
- When installing multiple radar sensors, do not place the detection surfaces opposite each other.
E nānā i ka QR-code i view kikoʻī
Hoʻoponopono Hoʻoponopono FCC
Hoʻopili kēia mea hana i ka ʻāpana 15 o nā lula FCC. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino.
- pono e ʻae kēia hāmeʻa i nā hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.
ʻO nā hoʻololi a i ʻole nā hoʻololi i ʻae ʻole ʻia e ka ʻaoʻao kuleana no ka hoʻokō hiki ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā lako.
MANAʻO: Ua hoʻāʻo ʻia kēia mea hana a ua ʻike ʻia e hoʻokō i nā palena no kahi hāmeʻa kikohoʻe Papa B, e like me ka ʻāpana 15 o nā Rula FCC. Hoʻolālā ʻia kēia mau palena no ka hāʻawi ʻana i ka palekana kūpono mai ka hoʻopilikia ʻino ʻana i kahi hoʻonohonoho hale. Hoʻohana kēia mea hana i nā hoʻohana a hiki ke hoʻomālamalama i ka ikehu alapine lekiō a, inā ʻaʻole i hoʻokomo ʻia a hoʻohana ʻia e like me nā kuhikuhi, hiki ke hoʻopilikia i nā kamaʻilio lekiō. Eia nō naʻe, ʻaʻohe mea e hōʻoiaʻiʻo ʻaʻole hiki ke keakea i kahi hoʻonohonoho. Inā hoʻopilikia kēia mea hana i ka hoʻokipa lekiō a i ʻole ke kīwī, hiki ke hoʻoholo ʻia ma ka hoʻohuli ʻana i nā mea hana, paipai ʻia ka mea hoʻohana e hoʻāʻo e hoʻoponopono i ka hoʻopili ʻana ma o hoʻokahi a ʻoi aku paha o kēia mau ana:
- Hoʻohuli a i ʻole e neʻe i ka antenna loaʻa.
- hoʻonui i ka hoʻokaʻawale ma waena o nā lakohana a me ka mea loaʻa.
-E hoʻohui i nā mea hana i kahi puka ma kahi kaapuni ʻokoʻa mai ka mea i hoʻopili ʻia ai ka mea hoʻokipa.
‐Consult the dealer or an experienced radio/TV technician for help important announcement.
MANAʻO: ʻAʻole kuleana o ka mea hana no nā lekiō a i ʻole ke kīwī i hana ʻia e nā hoʻololi ʻae ʻole ʻia i kēia mea hana. Hiki i ia mau hoʻololi ke hoʻopau i ka mana o ka mea hoʻohana e hana i ka lako.
ʻŌlelo Hōʻikeʻike Radiation
Hoʻopili kēia mea hana i nā palena hōʻike radiation FCC i hoʻonohonoho ʻia no kahi kaiapuni ʻole.
Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20cm ma waena o ka radiator a me kou kino.
ʻAʻole pono e hui pū ʻia kēia transmitter a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
ʻŌlelo ISED
Hoʻopili kēia hāmeʻa me nā maʻamau RSS i hoʻokuʻu ʻia i ka laikini Innovation, Science and Economic Development Canada.
Aia ka hana i nā kūlana ʻelua:
(1) ʻAʻole hiki i kēia hāmeʻa ke hoʻopilikia, a (2) pono i kēia hāmeʻa ke ʻae i ka hoʻopilikia ʻana, me ka hoʻopili ʻana i hiki ke hoʻohana ʻole ʻia ka mea hana.
Hoʻopili kēia mea hana me nā palena hoʻolaha pāhawewe ISED i hoʻonohonoho ʻia no kahi kaiapuni i hoʻomalu ʻole ʻia. Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20 cm ma waena o ka radiator a me kou kino. ʻAʻole pono e hui pū ʻia kēia transmitter a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
Palekana Palekana
No ka palapala hoʻokō palena ʻole, e kipa https://3reality.com/faq-help-center/
No ke kākoʻo o nā mea kūʻai aku, e ʻoluʻolu e kelepona mai iā mākou ma info@3reality.com a kipa mai www.3reality.com
No nā nīnau e pili ana i nā paepae ʻē aʻe, e kipa i ke kahua noi/kākoʻo e pili ana.
Palapala / Punawai
 |
THIRDREALITY R1 Smart Motion Sensor [pdf] Ke alakaʻi hoʻohana R1_QSG_20250310, R1, R1 Smart Motion Sensor, R1 Motion Sensor, Smart Motion Sensor, Motion Sensor, Smart Sensor, Sensor |