CISCO 802.11 Nā ʻāpana no nā wahi komo
Nā kikoʻī:
- Huahana: Cisco Access Points
- Nā pēke pinepine: 2.4 GHz, 5 GHz
- Nā kūlana i kākoʻo ʻia: 802.11b, 802.11n
- Antenna Gain Range: 0 a 20 dBi
- Transmit Power Levels: Auto
Nā ʻōlelo hoʻohana huahana
Ke hoʻonohonoho nei i ke kākoʻo lekiō 2.4-GHz:
- E hoʻā i ke ʻano EXEC pono ma ke komo ʻana i ke kauoha:
enable - Configure Spectrum Intelligence (SI) for the 2.4-GHz radio on aspecific slot:ap name ap-name dot11 24ghz slot 0 SI
- Configure the antenna for the 2.4-GHz radio on slot 0:ap name ap-name dot11 24ghz slot 0 antenna selection internal
- Enable beamforming for the 2.4-GHz radio:ap name ap-name dot11 24ghz slot 0 beamforming
- Configure the channel assignment for the 2.4-GHz radio:ap name ap-name dot11 24ghz slot 0 channel auto
- Enable CleanAir for the 2.4-GHz radio:ap name ap-name dot11 24ghz slot 0 cleanair
- Configure the antenna type for the 2.4-GHz radio:ap name ap-name dot11 24ghz A | B | C | D
- Shutdown the 2.4-GHz radio on slot 0:ap name ap-name dot11 24ghz slot 0 shutdown
- Configure the transmit power level for the 2.4-GHz radio:ap name ap-name dot11 24ghz slot 0 txpower auto
Ke hoʻonohonoho nei i ke kākoʻo lekiō 5-GHz:
- E hoʻā i ke ʻano EXEC pono ma ke komo ʻana i ke kauoha:
enable
Kākoʻo Radio
Kākoʻo Radio 2.4-GHz
Ke hoʻonohonoho nei i ke kākoʻo lekiō 2.4-GHz no ka helu kau i koho ʻia
Ma mua o kou hoʻomaka ʻana
Nānā E hoʻohana ʻia ka huaʻōlelo lekiō 802.11b a i ʻole 2.4-GHz lekiō.
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 24ghz slot 0 SI
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 SI |
Enables Spectrum Intelligence (SI) for the dedicated 2.4-GHz radio hosted on slot 0 for a specific access point. For more information, Spectrum Intelligence pauku ma keia alakai. |
| Eia, 0 pili i ka ID Slot. | ||
| KaʻAnuʻu 3 | ap inoa ap-inoa kiko11 24ghz slot 0 antenna
{ext-ant-gain antenna_gain_value | koho [i loko | waho]}Example: Mea Hana # ap inoa AP-SIDD-A06 dot11 24ghz slot 0 antenna koho kūloko |
Hoʻonohonoho i ka antenna 802.11b i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
• ext-ant-gain: Configures the 802.11b external antenna gain. antenna_gain_value– Refers to the external antenna gain value in multiples of .5 dBi units. The valid range is from 0 to 40, the maximum gain being 20 dBi. • koho: Hoʻonohonoho i ke koho antenna 802.11b (loko a i waho paha).
Nānā • For APs supporting self-identifying antennas (SIA), the gain depends on the antenna, and not on the AP model. The gain is learned by the AP and there is no need for controller configuration. • For APs that do not support SIA, the APs send the antenna gain in the configuration payload, where the default antenna gain depends on the AP model. • Cisco Catalyst 9120E and 9130E APs support self-identifying antennas (SIA). Cisco Catalyst 9115E APs do not support SIA antennas. Although Cisco Catalyst 9115E APs work with SIA antennas, the APs do not auto-detect SIA antennas nor add the correct external gain. |
| KaʻAnuʻu 4 | inoa ap ap-inoa dot11 24ghz slot 0 beamforming
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 beamforming |
Hoʻonohonoho i ka hana ʻana i ka beamform no ka lekiō 2.4-GHz i hoʻokipa ʻia ma ka slot 0 no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 5 | inoa ap ap-inoa dot11 24ghz slot 0 kaha
{kaila_helu | kaʻa} Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 channel auto |
Hoʻonohonoho i nā ʻāpana hoʻokaʻina kaha 802.11 kiʻekiʻe no ka lekiō 2.4-GHz i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 6 | ap inoa ap-inoa kiko11 24ghz slot 0 cleanair
Example: |
Hiki iā CleanAir no ka lekiō 802.11b i hoʻokipa ʻia ma ka slot 0 no kahi kiko kikoʻī. |
| Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 cleanair | ||
| KaʻAnuʻu 7 | inoa ap ap-inoa dot11 24ghz slot 0 dot11n antenna {A | B | C | D}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 dot11n antenna A |
Hoʻonohonoho i ka antenna 802.11n no ka lekiō 2.4-GHz i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
Eia, A: ʻO ke awa antenna A. B: ʻO ke awa antenna B. C: ʻO ke awa antenna C. D: ʻO ke awa antenna D. |
| KaʻAnuʻu 8 | inoa ap ap-inoa dot11 24ghz slot 0 pani
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 pani |
Hoʻopau i ka lekiō 802.11b i hoʻokipa ʻia ma ka slot 0 no kahi kiko kikoʻī. |
| KaʻAnuʻu 9 | ap inoa ap-inoa kiko11 24ghz slot 0 txpower
{tx_power_level | kaʻa} Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 24ghz slot 0 txpower auto |
Hoʻonohonoho i ka pae mana hoʻouna no ka lekiō 802.11b i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
• tx_power_level: ʻO ka pae mana hoʻouna ma dBm. ʻO ka laulā kūpono mai 1 a 8. • kaʻa: Hiki i ka auto-RF. |
Kākoʻo Radio 5-GHz
Ke hoʻonohonoho nei i ke kākoʻo lekiō 5-GHz no ka helu kau i koho ʻia
Ma mua o kou hoʻomaka ʻana
Nānā E hoʻohana ʻia ka huaʻōlelo 802.11a lekiō a i ʻole 5-GHz lekiō ma kēia palapala.
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 5ghz slot 1 SI
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 SI |
Hiki i ka Spectrum Intelligence (SI) no ka lekiō 5-GHz i hoʻolaʻa ʻia ma ka slot 1 no kahi kikoʻī kikoʻī.
Eia, 1 pili i ka ID Slot. |
| KaʻAnuʻu 3 | inoa ap ap-inoa dot11 5ghz slot 1 antenna ext-ant-gain antenna_gain_value
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 antenna ext-ant-gain |
Hoʻonohonoho i ka loaʻa ʻana o nā antenna waho no nā lekiō 802.11a no kahi wahi kikoʻī i hoʻokipa ʻia ma ka slot 1.
antenna_gain_value—Refers to the external antenna gain value in multiples of .5 dBi units. The valid range is from 0 to 40, the maximum gain being 20 dBi. Nānā • For APs supporting self-identifying antennas (SIA), the gain depends on the antenna, and not on the AP model. The gain is learned by the AP and there is no need for controller configuration. • For APs that do not support SIA, the APs send the antenna gain in the configuration payload, where the default antenna gain depends on the AP model. • Cisco Catalyst 9120E and 9130E APs support self-identifying antennas (SIA). Cisco Catalyst 9115E APs do not support SIA antennas. Although Cisco Catalyst 9115E APs work with SIA antennas, the APs do not auto-detect SIA antennas nor add the correct external gain. |
| KaʻAnuʻu 4 | inoa ap ap-inoa dot11 5ghz slot 1 antenna mode [omni | ʻāpanaA | ʻāpanaB]
Example: Mea Hana # ap inoa AP-SIDD-A06 dot11 5ghz slot 1 antenna mode sectorA |
Hoʻonohonoho i ke ʻano antenna no nā lekiō 802.11a no kahi kikoʻī kikoʻī i mālama ʻia ma ka slot 1. |
| KaʻAnuʻu 5 | inoa ap ap-inoa dot11 5ghz slot 1 antenna koho [i loko | waho]
Example: Mea Hana # ap inoa AP-SIDD-A06 dot11 5ghz slot 1 antenna koho kūloko |
Hoʻonohonoho i ke koho ʻana i nā antenna no nā lekiō 802.11a no kahi wahi kikoʻī i hoʻokipa ʻia ma ka slot 1. |
| KaʻAnuʻu 6 | inoa ap ap-inoa dot11 5ghz slot 1 beamforming
Example: |
Hoʻonohonoho i ka hana ʻana i ka beamform no ka lekiō 5-GHz i hoʻokipa ʻia ma ka slot 1 no kahi kikoʻī kikoʻī. |
| Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 beamforming | ||
| KaʻAnuʻu 7 | inoa ap ap-inoa dot11 5ghz slot 1 kaha
{kaila_helu | kaʻa | laula [20 | 40 | 80 | 160]} Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 channel auto |
Hoʻonohonoho i nā ʻāpana hoʻokaʻina kaha 802.11 kiʻekiʻe no ka lekiō 5-GHz i mālama ʻia ma ka slot 1 no kahi kikoʻī kikoʻī.
Eia, kaila_helu- E pili ana i ka helu channel. ʻO ka laulā kūpono mai 1 a 173. |
| KaʻAnuʻu 8 | inoa ap ap-inoa dot11 5ghz slot 1 cleanair
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 cleanair |
Hiki iā CleanAir no ka lekiō 802.11a i mālama ʻia ma ka slot 1 no kahi kikoʻī i hāʻawi ʻia. |
| KaʻAnuʻu 9 | inoa ap ap-inoa dot11 5ghz slot 1 dot11n antenna {A | B | C | D}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 dot11n antenna A |
Hoʻonohonoho i ka 802.11n no ka lekiō 5-GHz i mālama ʻia ma ka slot 1 no kahi kikoʻī kikoʻī.
Eia, A- ʻO ke awa antenna A. B- ʻO ke awa antenna B. C- ʻO ke awa antenna C. D- ʻO ke awa antenna D. |
| KaʻAnuʻu 10 | inoa ap ap-inoa dot11 5ghz slot 1 rrm channel kaila
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 rrm channel 2 |
ʻO kahi ala ʻē aʻe e hoʻololi ai i ke kahawai i mālama ʻia ma ka slot 1 no kahi kikoʻī kikoʻī.
Eia, kaila- E pili ana i ke kaila hou i hana ʻia me ka hoʻolaha ʻana o ke kahawai 802.11h. ʻO ka laulā kūpono mai ka 1 a hiki i ka 173, hāʻawi ʻia ʻo 173 kahi ala kūpono ma ka ʻāina kahi i kau ʻia ai ka wahi komo. |
| KaʻAnuʻu 11 | inoa ap ap-inoa dot11 5ghz slot 1 pani
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 pani |
Hoʻopau i ka lekiō 802.11a i mālama ʻia ma ka slot 1 no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 12 | inoa ap ap-inoa dot11 5ghz slot 1 txpower
{tx_power_level | kaʻa} Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 5ghz slot 1 txpower auto |
Hoʻonohonoho i ka lekiō 802.11a i hoʻokipa ʻia ma ka slot 1 no kahi wahi kikoʻī.
• tx_power_level- ʻO ka pae mana hoʻouna ma dBm. ʻO ka laulā kūpono mai 1 a 8. • kaʻa- Hoʻā i ka auto-RF. |
ʻIkepili e pili ana i ke Kākoʻo Radio Dual-Band
Hāʻawi ka lekiō Dual-Band (XOR) ma Cisco 2800, 3800, 4800, a me nā hiʻohiʻona AP 9120 series i ka hiki ke lawelawe i nā pūʻulu 2.4-GHz a i ʻole 5-GHz a i ʻole ka nānā pono ʻana i nā pūʻulu ʻelua ma ka AP hoʻokahi. Hiki ke hoʻonohonoho ʻia kēia mau AP no ka lawelawe ʻana i nā mea kūʻai aku ma nā pūʻulu 2.4–GHz a me 5–GHz, a i ʻole e nānā pono i nā pūʻulu 2.4–GHz a me 5–GHz ma ka lekiō maʻalahi aʻo ka lekiō 5–GHz nui e lawelawe i nā mea kūʻai.
Cisco APs models up and through the Cisco 9120 APs are designed to support dual 5–GHz band operations with the i model supporting a dedicated Macro/Micro architecture and the e and p models supporting Macro/Macro. The Cisco 9130AXI APs support dual 5-GHz operations as Macro/Micro cell.
Ke neʻe ka lekiō ma waena o nā pūʻulu (mai ka 2.4-GHz a i ka 5-GHz a me ka ʻokoʻa), pono e alakaʻi ʻia nā mea kūʻai aku e loaʻa ka mahele maikaʻi loa ma nā lekiō. Ke loaʻa ʻelua lekiō o ka AP ma ka pūʻulu 5-GHz, hoʻohana ʻia nā algorithms hoʻokele o ka mea kūʻai aku i loko o ka Flexible Radio Assignment (FRA) algorithm e hoʻokele i ka mea kūʻai aku ma waena o nā lekiō kamaʻāina like.
Hiki ke hoʻokele lima a ʻakomi paha ke kākoʻo radio XOR:
- Ke hoʻokele lima o kahi pūʻali ma ka lekiō—Hiki ke hoʻololi lima wale ʻia ka hui ma ka lekiō XOR.
- Hoʻokele ʻia ka mea kūʻai aku a me ka hoʻokele band ma nā lekiō e ka hiʻohiʻona FRA e nānā a hoʻololi i nā hoʻonohonoho hui e like me nā koi o ka pūnaewele.
HOOLAHA
- ʻAʻole e holo ana ke ana RF ke hoʻonohonoho ʻia kahi kaila static ma ka slot 1. Ma muli o kēia, e neʻe ka pahu lekiō pālua ʻelua 0 me ka lekiō 5-GHz ʻaʻole i ke ʻano nānā.
- Ke pio ka lekiō slot 1, ʻaʻole e holo ana ke ana ʻana o RF, a ma ka lekiō 0–GHz wale nō ka pahu lekiō pālua 2.4.
- Hoʻokahi wale nō o nā lekiō 5-GHz hiki ke hana i ka hui UNII (100 - 144), ma muli o kahi palena AP e mālama i ka waihona mana i loko o ka palena hoʻoponopono.
Ke hoʻonohonoho nei i ke kākoʻo lekiō XOR
Ma mua o kou hoʻomaka ʻana
Nānā Kuhi ka lekiō paʻamau i ka lekiō XOR i mālama ʻia ma ka slot 0.
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea Hana # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 antenna pālua ʻelua ext-ant-gain antenna_gain_value
Example: Mea # ap inoa ap-inoa dot11 antenna pālua ʻelua ext-ant-gain 2 |
Hoʻonohonoho i ka antenna pālua ʻelua 802.11 ma kahi kikowaena Cisco kikoʻī.
antenna_gain_value: Mai ka 0 a hiki i ka 40 ka laulā kūpono. |
| KaʻAnuʻu 3 | inoa ap ap-inoa [ʻaʻohe] dot11 paʻa pālua pālua
Example: Mea # ap inoa ap-inoa dot11 paʻa pālua ʻelua |
Hoʻopaʻa i ka lekiō pālua ʻelua ma kahi kikowaena Cisco kikoʻī.
E hoʻohana i ka ʻAʻole ʻano o ke kauoha e hiki ai i ka lekiō. |
| KaʻAnuʻu 4 | inoa ap ap-inoa dot11 pālua-pānaʻi hana manual client-serving
Example: Mea # ap inoa ap-inoa dot11 pālua-pānaʻi hana manual client-serving |
Ke hoʻololi nei i ke ʻano lawelawe lawelawe ma ke kikowaena Cisco. |
| KaʻAnuʻu 5 | inoa ap ap-inoa dot11 hui pālua-lua 24ghz
Example: Mea # ap inoa ap-inoa dot11 hui pālua-lua 24ghz |
Ke hoʻololi nei i ka lekiō 2.4-GHz. |
| KaʻAnuʻu 6 | inoa ap ap-inoa dot11 lua-hui txpower
{hoʻouna_mana_level | kaʻa} Example: Mea # ap inoa ap-inoa dot11 lua-hui txpower 2 |
Hoʻonohonoho i ka mana hoʻouna no ka lekiō ma kahi kikowaena Cisco kikoʻī.
Nānā Ke hoʻonohonoho ʻia kahi lekiō hiki i ka FRA (slot 0 ma 9120 AP[e like me ka laʻana]) i Auto, ʻaʻole hiki iā ʻoe ke hoʻonohonoho i ke kahawai static a me Txpower ma kēia lekiō. If you want to configure static channel and Txpower on this radio, you will need to change the radio role to Manual Client-Serving mode. |
| KaʻAnuʻu 7 | inoa ap ap-inoa kaila dot11 pālua ʻelua
kaha-helu Example: |
Komo i ke ala no ka hui pālua.
kaha-helu—ʻO ka laulā kūpono mai ka 1 a hiki i ka 173. |
| Mea # ap inoa ap-inoa dot11 kaila ʻelua-pānaʻi 2 | ||
| KaʻAnuʻu 8 | inoa ap ap-inoa dot11 kaila pahu pālua ʻelua
Example: Mea # ap inoa ap-inoa dot11 kaila pahu pālua ʻelua |
Ho'ā i ka hāʻawi ʻana i ke kahawai ʻakomi no ka hui pālua. |
| KaʻAnuʻu 9 | inoa ap ap-inoa dot11 ka laula o ke kahawai pālua-band{20 MHz | 40 MHz | 80 MHz | 160 MHz}
Example: Mea # ap inoa ap-inoa dot11 awāwa pālua ʻelua 20 MHz |
Koho i ka laula o ke kahawai no ka bana pālua. |
| KaʻAnuʻu 10 | inoa ap ap-inoa dot11 lua-hui cleanair
Example: Mea # ap inoa ap-inoa dot11 lua-hui cleanair |
Hiki i ka Cisco CleanAir hiʻona ma ka lekiō pālua ʻelua. |
| KaʻAnuʻu 11 | inoa ap ap-inoa dot11 hui lua-pā holoi holoi{24 GHz | 5 GMHz}
Example: Mea # ap inoa ap-inoa dot11 hui lua-pāpaʻa maʻemaʻe 5 GHz Mea # ap inoa ap-inoa [ʻaʻole] dot11 hui lua-pāʻeleʻele 5 GHz |
Koho i kahi hui no ka hiʻona Cisco CleanAir.
E hoʻohana i ka ʻAʻole ʻano o kēia kauoha e hoʻopau i ka hiʻohiʻona Cisco CleanAir. |
| KaʻAnuʻu 12 | inoa ap ap-inoa antenna dot11 pālua ʻelua dot11n {A | B | C | D}
Example: Mea # ap inoa ap-inoa dot11 pālua ʻelua dot11n antenna A |
Hoʻonohonoho i nā ʻāpana pālua ʻelua 802.11n no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 13 | hōʻike i ka inoa ap ap-inoa auto-rf dot11 pālua-pāʻani
Example: Hōʻike ʻia ka inoa o ka mea hana # ap-inoa auto-rf dot11 pālua-pāʻani |
Hōʻike i ka ʻike auto-RF no ka wahi komo Cisco. |
| KaʻAnuʻu 14 | hōʻike i ka inoa ap ap-inoa wlan dot11 pālua ʻelua
Example: Hōʻike ʻia ka inoa o ka mea hana # ap-inoa wlan dot11 pālua ʻelua |
Hōʻike i ka papa inoa o nā BSSID no ka wahi komo Cisco. |
Ka hoʻonohonoho ʻana i ke kākoʻo lekiō XOR no ka helu kau i koho ʻia (GUI)
Kaʻina hana
KaʻAnuʻu 1 Click Configuration >Wireless > Access Points.
KaʻAnuʻu 2 Ma ka ʻāpana ʻelua-Band Radios, koho i ka AP āu e makemake ai e hoʻonohonoho i nā lekiō pālua ʻelua.
Hōʻike ʻia ka inoa AP, ka helu MAC, ka mana CleanAir a me ka ʻike slot no ka AP. Inā HALO ke ʻano Hyperlocation, hōʻike pū ʻia ka PID antenna a me ka ʻike hoʻolālā antenna.
KaʻAnuʻu 3 Kaomi Hoʻonohonoho.
KaʻAnuʻu 4 I ka General tab, e hoʻonoho i ke kūlana Admin e like me ka makemake.
KaʻAnuʻu 5 E hoʻonoho i ke kahua Kūlana Admin CleanAir e hoʻā a hoʻopau paha.
KaʻAnuʻu 6 Kaomi iā Update & Apply to Device.
Ke hoʻonohonoho nei i ke kākoʻo lekiō XOR no ka helu kau i koho ʻia
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 pahu pahu pālua 0 antenna ext-ant-gain external_antenna_gain_value
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pūʻā pālua-lua 0 antenna ext-ant-gain 2 |
Hoʻonohonoho i nā antenna pālua ʻelua no ka lekiō XOR i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
external_antenna_gain_value - Loaʻa ka waiwai o ka antenna waho ma nā ʻāpana he .5 dBi. ʻO ka laulā kūpono mai 0 a 40. Nānā • For APs supporting self-identifying antennas (SIA), the gain depends on the antenna, and not on the AP model. The gain is learned by the AP and there is no need for controller configuration. • For APs that do not support SIA, the APs send the antenna gain in the configuration payload, where the default antenna gain |
| KaʻAnuʻu 3 | inoa ap ap-inoa dot11 pahu pahu pālua 0 band {24ghz | 5ghz}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pahu pālua 0 band 24ghz |
Hoʻonohonoho i ka pūʻulu o kēia manawa no ka lekiō XOR i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 4 | inoa ap ap-inoa dot11 pahu pahu pālua 0 kaha {kaila_helu | kaʻa | laula [160
| 20 | 40 | 80]} Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pahu pālua 0 kaha 3 |
Hoʻonohonoho ʻia i ke kahawai pālua ʻelua no ka lekiō XOR i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
kaila_helu- ʻO ka pae kūpono mai 1 a 165. |
| KaʻAnuʻu 5 | inoa ap ap-inoa dot11 pūʻā pālua ʻelua 0 pūʻulu cleanair {24Ghz | 5Ghz}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pālua-lua 0 pūʻau holoi holoi 24Ghz |
Hoʻola i nā hiʻohiʻona CleanAir no nā lekiō pālua ʻelua i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī. |
| KaʻAnuʻu 6 | inoa ap ap-inoa dot11 pahu pālua ʻelua 0 dot11n antenna {A | B | C | D}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pālua ʻelua 0 dot11n antenna A |
Hoʻonohonoho i nā ʻāpana pālua ʻelua 802.11n i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
Eia, A- Hiki i ke awa antenna A. B- Hiki i ke awa antenna B. C- Hiki i ke awa antenna C. D- Hiki i ke awa antenna D. |
| KaʻAnuʻu 7 | ap inoa ap-inoa kiko11 pāpālua slot 0 kuleana
{kaʻa | manual [lawelawe-mea kūʻai | kiaʻi]} Example: Mea Hana # ap inoa AP-SIDD-A06 dot11 lua-band slot 0 kuleana auto |
Hoʻonohonoho i ka hana pālua ʻelua no ka lekiō XOR i mālama ʻia ma ka slot 0 no kahi kiko kikoʻī.
Eia nā kuleana pālua ʻelua: • kaʻa- E pili ana i ke koho pono lekiō. • manual- E pili ana i ke koho hana radio manual. |
| KaʻAnuʻu 8 | inoa ap ap-inoa dot11 pahu pahu pālua 0 pani
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pahu pālua 0 pani |
Hoʻopau i ka lekiō pālua ʻelua i hoʻokipa ʻia ma ka slot 0 no kahi kiko kikoʻī.
E hoʻohana i ka ʻAʻole ʻano o kēia kauoha e hiki ai i ka lekiō pālua ʻelua. |
| Mea Hana # inoa ap AP-SIDD-A06 [ʻaʻole] dot11 pahu pālua 0 pani | ||
| KaʻAnuʻu 9 | inoa ap ap-inoa dot11 pahu pahu pālua 0 txpower {tx_power_level | kaʻa}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 pahu pahu pālua 0 txpower 2 |
Hoʻonohonoho i ka mana hoʻouna pālua ʻelua no ka lekiō XOR i mālama ʻia ma ka slot 0 no kahi kikoʻī kikoʻī.
• tx_power_level- ʻO ka pae mana hoʻouna ma dBm. ʻO ka laulā kūpono mai 1 a 8. • kaʻa- Hoʻā i ka auto-RF. |
Kākoʻo Radio Kākoʻo ʻElua wale nō ka mea loaʻa
ʻIkepili e pili ana i ka mea loaʻa wale nō ke kākoʻo lekiō pālua-band
Hoʻonohonoho kēia hiʻohiʻona i nā hiʻohiʻona lekiō Rx-wale wale no kahi wahi komo me nā lekiō pālua.
This dual-band Rx-only radio is dedicated for Analytics, Hyperlocation, Wireless Security Monitoring, and
BLE AoA*.
This radio will always continue to serve in monitor mode, therefore, you will not be able to make any channel
and tx-rx configurations on the 3rd radio.
Ka hoʻonohonoho ʻana i ka mea loaʻa i nā ʻāpana ʻelua wale no nā wahi komo
E ho'ā ana i ka CleanAir me ka mea loaʻa i ka lekiō pālua ʻelua wale nō ma kahi Cisco Access Point (GUI)
Kaʻina hana
KaʻAnuʻu 1 Choose Configuration >Wireless > Access Points.
KaʻAnuʻu 2 Ma nā hoʻonohonoho ʻo Dual-Band Radios, kaomi i ka AP āu e makemake ai e hoʻonohonoho i nā lekiō pālua ʻelua.
KaʻAnuʻu 3 Ma ka ʻaoʻao General, e hoʻā i ke pihi hoʻololi CleanAir.
KaʻAnuʻu 4 Kaomi iā Update & Apply to Device.
Hoʻohana ʻia ʻo CleanAir me ka mea hoʻokipa ʻelua wale nō ka lekiō ma kahi Cisco Access Point
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki Example: | Hoʻokomo i ke ʻano EXEC ponoʻī. |
| Mea # hiki | ||
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 rx-dual-band slot 2 cleanair band {24Ghz | 5Ghz}
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 rx-dual-band slot 2 cleanair band 24Ghz Mea Hana # inoa ap AP-SIDD-A06 [ʻaʻole] dot11 rx-lua-band slot 2 cleanair band 24Ghz |
Hiki iā CleanAir me ka mea hoʻokipa wale nō (Rx-wale) lekiō pālua ma kahi kikoʻī kikoʻī.
Maʻaneʻi, pili ka 2 i ka ID slot. E hoʻohana i ka ʻAʻole ʻano o kēia kauoha e hoʻopau iā CleanAir. |
Hoʻopaʻa ʻia ka Lekiō ʻElua wale nō ma kahi Cisco Access Point (GUI)
Kaʻina hana
KaʻAnuʻu 1 Choose Configuration >Wireless > Access Points.
KaʻAnuʻu 2 Ma nā hoʻonohonoho ʻo Dual-Band Radios, kaomi i ka AP āu e makemake ai e hoʻonohonoho i nā lekiō pālua ʻelua.
KaʻAnuʻu 3 Ma ka ʻaoʻao General, e hoʻopau i ke pihi hoʻololi i ke kūlana CleanAir.
KaʻAnuʻu 4 Kaomi iā Update & Apply to Device.
Hoʻopau i ka mea loaʻa i ka lekiō pālua ʻelua wale nō ma kahi Cisco Access Point
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | inoa ap ap-inoa dot11 rx-dual-band slot 2 pani
Example: Mea Hana # inoa ap AP-SIDD-A06 dot11 rx-dual-band slot 2 pani Mea Hana # inoa ap AP-SIDD-A06 [no] dot11 rx-dual-band slot 2 pani |
Hoʻopau i ka lekiō pālua ʻelua wale nō ma kahi kikowaena Cisco kikoʻī.
Maʻaneʻi, pili ka 2 i ka ID slot. E hoʻohana i ka ʻAʻole ʻano o kēia kauoha e hiki ai i ka mea hoʻokipa wale nō ka lekiō pālua ʻelua. |
Ke hoʻonohonoho nei i ka hoʻokele o nā mea kūʻai aku (CLI)
Ma mua o kou hoʻomaka ʻana
E ho'ā i ka Cisco CleanAir ma ka lekiō pālua ʻelua.
Kaʻina hana
| Kauoha or Hana | Ke kumu | |
| KaʻAnuʻu 1 | hiki
Example: Mea Hana # hiki |
Hoʻokomo i ke ʻano EXEC ponoʻī. |
| KaʻAnuʻu 2 | hoʻonohonoho i ka pahu
Example: Mea Hana # hoʻonohonoho i ka pahu |
Hoʻokomo i ke ʻano hoʻonohonoho honua. |
| KaʻAnuʻu 3 | hoʻololi hoʻokele hoʻokele ʻole macro-micro-paepae balancing-window helu-o-nā mea kūʻai mai (0-65535)
Example: Meahana(config)# uwea macro-micro hoʻokele hoʻololi-paepae kaulike-puka 10 |
Hoʻonohonoho ʻia i ka puka aniani hoʻokau-kaulike o ka mea kūʻai aku micro-macro no kahi helu o nā mea kūʻai aku. |
| KaʻAnuʻu 4 | ka helu o ka mea kūʻai aku i ka hoʻokele hoʻokele macro-micro uila helu-o-nā mea kūʻai mai (0-65535)
Example: Meahana(config)# uwea macro-micro hoʻokele hoʻololi-paepae helu mea kūʻai aku 10 |
Hoʻonohonoho i nā ʻāpana mea kūʻai macro-micro no ka helu liʻiliʻi o ka mea kūʻai aku no ka hoʻololi. |
| KaʻAnuʻu 5 | hoʻokele hoʻokele hoʻokele hoʻokele uila-paepae macro-to-micro RSSI-i-dBm( –128—0)
Example: Mea hana(config)# uwea macro-micro hookele hoʻololi-paepae macro-to-micro -100 |
Hoʻonohonoho i ka RSSI hoʻololi macro-to-micro. |
| KaʻAnuʻu 6 | hoʻokele hoʻokele hoʻokele ʻoniʻoni uila-paepae micro-to-macro RSSI-i-dBm(–128—0)
Example: |
Hoʻonohonoho i ka RSSI hoʻololi micro-to-macro. |
| Meahana(config)# uwea macro-micro hookele hoʻololi-paepae
micro-a-macro -110 |
||
| KaʻAnuʻu 7 | ʻeleu ʻole macro-micro steering probe-suppression aggressiveness helu-o-ka pō (–128—0)
Example: Meahana(config)# uwea macro-micro hoʻokele probe-hoʻopiʻi ʻino -110 |
Hoʻonohonoho i ka helu o nā pōʻaiapuni e hoʻopaʻa ʻia. |
| KaʻAnuʻu 8 | hoʻokele macro-micro uila
hysteresis hoʻopaʻa ʻimi noiʻi RSSI-i-dBm Example: Meahana(config)# uwea macro-micro hoʻokele probe-suppression hysteresis -5 |
Hoʻonohonoho i ka ʻimi macro-to-micro ma RSSI. Aia ka laulā ma waena o -6 a i -3. |
| KaʻAnuʻu 9 | ʻeleʻele macro-micro hoʻokele hoʻokele-hoʻopiʻi ʻimi-wale
Example: Meahana(config)# uwea macro-micro hoʻokele hoʻokele-hoʻopiʻi ʻimi-wale nō |
Hoʻā i ke ʻano hoʻopaʻa ʻimi noiʻi. |
| KaʻAnuʻu 10 | ʻeleʻele macro-micro hoʻokele hoʻokele-hoʻopiʻi ʻimi-auth
Example: Meahana(config)# uwea macro-micro hoʻokele hoʻokele-hoʻopiʻi ʻimi-auth |
Ho'ā i ka ʻimi noiʻi a me ke ʻano hoʻopaʻa hōʻoia hoʻokahi. |
| KaʻAnuʻu 11 | hōʻike i ka hoʻokele uea ʻole
Example: Hōʻike ka polokalamu # i ka hoʻokele uila |
Hōʻike i ka ʻike hoʻokele o ka mea kūʻai uila. |
Ke hōʻoiaʻiʻo nei i nā wahi e komo ai ʻo Cisco me nā lekiō pālua
No ka hōʻoia ʻana i nā wahi komo me nā lekiō pālua, e hoʻohana i kēia kauoha:
Hōʻike ka mea hana # i ka hōʻuluʻulu manaʻo ʻelua-band ap dot11
Nīnau pinepine
What is the valid range for the external antenna gain value?
The valid range for the external antenna gain value is from 0 to 40 dBi, with a maximum gain of 20 dBi.
Palapala / Punawai
 |
CISCO 802.11 Nā ʻāpana no nā wahi komo [pdf] Ke alakaʻi hoʻohana 802.11, 802.11 Nā ʻāpana no nā wahi komo, nā ʻāpana no nā wahi komo, nā helu komo. |