MC25 Mea ʻIke ʻIke
1. ʻOkoʻa
ʻO ka Montage Object Detection Sensor is a stand-alone Time of Flight Volumetric Sensor with
advanced hardware and firmware features. It is designed around an advanced Time of Flight
imager chip. The system detects the presence or absence of cargo inside a container or a trailer
and communicates data collected to a gateway over Bluetooth. It is mounted on the inside
ceiling of a trailer and powered from an external 12VDC power source. By looking down from
the ceiling, it senses the presence of cargo on the floor of the trailer.
Nā kikoʻī
| 1. Mīkini | ||
| 1.1 | Dimensions Sensor Palaka | Rectangular 107 x 52 x 25.4 mm |
| 1.2 | Ana Mana Puna | Cable with 12VDC on a customized 4 pin connector Connector. Power can be from a battery and joined with other units within the trailer |
| 1.3 | Kahi hoʻokomo | Sensor (shown by red arrow) will be attached to the EB and look down unobstructed to the floor.
The sensor will be mounted to the ceiling, centered between the walls. The mount will be no more than 4” below the ceiling, connected by cables down the center of the ceiling to the Energous Bridge (EB, shown by yellow oval).
|
| 1.4 | Hale noho Mea waiwai | Product: Molded Valox FR Resin V3900WX Polycarbonate + PBT |
| 1.5 | Hale noho kalakala | Keʻokeʻo |
| 1.6 | Ke kau ʻana | x4 Internal Rivets or sheet metal screws. Installation from inside.
Needs to be with 2” of roof center and have < 2-degree tilt relative to the floor. Tilt and compensation for being off center can be adjusted with angle Alignment Plates underneath the housing i ka wā e kau ana. |
| 1.7 | Ka helu IP | IP67 rated water resistant housing to ensure device can withstand fine dust and protection from condensing humidity within the reefer. |
| 1.8 | Ka Mahana Hana | -20˚C to +60˚C (-4˚F to 140˚F) |
| 1.9 | Ka helu ʻana i ke ahi | UL 94 V-0 |
| 2. Hoʻolālā | ||
| 2.1 | Bluetooth ® Antenna | Internal antenna positioned inside the Sensor enclosure for good reception. |
| 2.2 | Trailer Ambient
Mahana |
Temperature sensor to measure the trailer internal ambient conditions is placed near the connector for thermal conduction. |
| 2.3 | Shock & Vibration Rating | U.S. Military Standards 202G and 810F, SAE
J1455 |
| 2.4 | EMC/EMI | SAE J1113; FCC-Mahele 15B ʻOihana
Kanaka |
| 3. Laser a me Optik | ||
| 3.1 | Mea kiʻi kiʻi | FPA = 8×8 pika (VCSEL hoʻokuʻu)
Resolution of up to 64 points |
| 3.2 | Lae Hana | 9' |
| 3.3 | Kūlana hana | No ka hoʻohana i loko wale nō |
| 4. Mana Mana | ||
| 4.1 | Source-1 | 12VDC power source power range (up to 24Vnom, 32V limit), resettable fuses, watchdog timer. |
| 4.2 | Kaha Bati | ʻO ka pākaukau ma luna o 800mAh |
| 5. Mea uila | ||
| 5.1 | CPU nui | NORDIC nRF52840 me OTA DFU Hiki |
| 5.2 | Bluetooth ® SoC | NORDIC nRF52840 me OTA DFU Hiki |
| 5.3 | Bluetooth ® Radio Front End Ampmea mālama ola | +18 dBm |
| 6. Hoʻohui | ||
| Bluetooth ® | ||
| 6.1 | Hoʻohui ʻole | Pairs nearby Bluetooth Gateway through a defined
communication structure in both data through BLE advertisement and connection profiles |
| 6.2 | Manao | ʻO ka ikehu haʻahaʻa Bluetooth BLE 5.0 |
| 6.3 | Mana Hoʻouna | -20dBm a i +8dBm
Selectable through Firmware |
| 7. Hooiaio | ||
| 7.1 | FCC | Product shall comply with all applicable wireless standards/rules |
| 7.2 | UL / CE | ʻAe |
| 7.3 | RoHS | Product shall be RoHS compliant and not have any known-harmful materials or substances on any external surface |
| 7.4 | Palekana Maka | Papa-1 |
3 Nā Kiʻi Huahana
4 Hoʻokomo Example
Nā Kūlana FCC
Hoʻopili kēia mea hana i ka ʻāpana 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:
(1) ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino, a
(2) pono e ʻae kēia hāmeʻa i nā mea hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke kumu i ka hana makemake ʻole.
Ua hoʻāʻo ʻia kēia mea hana a ua ʻike ʻia e hoʻokō i nā palena no kahi hāmeʻa kikohoʻe Papa B, e like me ka ʻāpana 15 o nā Rula FCC. Hoʻolālā ʻia kēia mau palena no ka hāʻawi ʻana i ka pale kūpono mai ka hoʻopilikia ʻino ʻana i kahi hoʻonohonoho hale. Hoʻohana, hoʻohana a hiki ke hoʻomālamalama i ka ikehu alapine lekiō a inā ʻaʻole i hoʻokomo ʻia a hoʻohana ʻia e like me nā kuhikuhi, hiki ke hoʻopilikia i nā kamaʻilio lekiō. Eia nō naʻe, ʻaʻohe mea e hōʻoiaʻiʻo ʻaʻole hiki ke keakea i kahi hoʻonohonoho. Inā hoʻopilikia kēia mea hana i ka lekiō a i ʻole ke kīwī, hiki ke hoʻoholo ʻia ma ka hoʻopau ʻana i nā mea hana, paipai ʻia ka mea hoʻohana e hoʻāʻo e hoʻoponopono i ka hoʻopili ʻana ma o hoʻokahi a ʻoi aku paha o kēia mau ana:
—Hoʻonohonoho hou a hoʻoneʻe paha i ka antenna e loaʻa ana.
—E hoʻonui i ka kaʻawale ma waena o nā mea hana a me ka mea hoʻokipa.
—E hoʻohui i nā mea hana i kahi puka ma kahi kaapuni ʻokoʻa mai ka mea i hoʻopili ʻia ai ka mea hoʻokipa.
—E kūkākūkā i ka mea kūʻai aku a i ʻole kekahi mea loea lekiō/TV no ke kōkua.
Hiki i nā hoʻololi a i ʻole nā hoʻololi i ʻae ʻole ʻia e ka mea hana ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā mea hana.
V 1.4 [3-14-2025]
Hōʻike Hōʻike Hōʻikeʻo FCC RF
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
5 o 5
Palapala / Punawai
 |
Montage MC25 Mea Manaʻo ʻIke [pdf] Palapala a ka mea nona 2BLQ4-MC25, 2BLQ4MC25, mc25, MC25 Mea ʻImi ʻImi, MC25, Mea ʻIke Mea, Mea ʻImi |