STMicroelectronics ST-LINKV2 Ma ka Papahana Debugger Kaapuni
Hoʻolauna
ʻO ka ST-LINK/V2 he mea hoʻopololei/programmer in-circuit no nā microcontrollers STM8 a me STM32. ʻO ka module interface wire single (SWIM) a me ka JTAG/Serial wire debugging (SWD) interfaces e maʻalahi ke kamaʻilio me kekahi STM8 a i ʻole STM32 microcontroller e hana ana ma kahi papa noi.
Ma waho aʻe o ka hāʻawi ʻana i nā hana like o ka ST-LINK/V2, hōʻike ka ST-LINK/V2 ISOL i ka hoʻokaʻawale kikohoʻe ma waena o ka PC a me ka papa noi i koho ʻia. Ua kū pū kekahi voltaga hiki i 1000 VRMS.
Hiki i ka USB holo wikiwiki ke kamaʻilio me kahi PC a:
- Nā polokalamu STM8 ma o ST Visual Develop (STVD) a i ʻole ST Visual Program (STVP) lako polokalamu (loaʻa mai STMicroelectronics)
- Nā polokalamu STM32 ma o IAR™, Keil®, STM32CubeIDE, STM32CubeProgrammer, a me STM32CubeMonitor nā kaiapuni hoʻomohala hoʻohui.
Nā hiʻohiʻona
- Hāʻawi ʻia ka mana 5 V e kahi mea hoʻopili USB
- USB 2.0 piha ka māmā holo kūpono
- USB maʻamau A i Mini-B uwea
- Nā hiʻohiʻona kikoʻī SWIM
– 1.65 a 5.5 V palapala noi voltage kākoʻo ʻia ma ke kikowaena SWIM
- Kākoʻo ʻia nā ʻano hana haʻahaʻa haʻahaʻa a me ka wikiwiki kiʻekiʻe
– SWIM programming-speed rate: 9.7 a me 12.8 Kbytes/s, kēlā me kēia, no ka haʻahaʻa a me ka wikiwiki kiʻekiʻe.
– SWIM uwea no ka hoʻopili ʻana i ka palapala noi ma o ka ERNI maʻamau kūpaʻa (hōʻike: 284697 a i ʻole 214017) a i ʻole ka mea hoʻopili (ref: 214012)
- Uea SWIM no ka hoʻopili ʻana i ka noi ma o ke poʻo pine a i ʻole kahi mea hoʻohui pitch 2.54 mm - JTAG/ serial uea debugging (SWD) hiʻona kiko'ī
– 1.65 a 3.6 V palapala noi voltage kākoʻo ʻia ma ka JTAG/SWD a me 5 V hoʻokomo hoʻomanawanui (a)
– JTAG uwea no ka hoʻopili ʻana i kahi maʻamau JTAG 20-pin pitch 2.54 mm mea hoʻohui
- Kākoʻo iā JTAG kamaʻilio, a hiki i 9 MHz (paʻamau: 1.125 MHz)
- Kākoʻo i ka debug uea serial (SWD) a hiki i 4 MHz (paʻamau: 1.8 MHz), a me ka uea serial viewkamaʻilio er (SWV), a hiki i 2 MHz - Kākoʻo ʻia ka hiʻohiʻona hoʻoponopono firmware pololei (DFU)
- ʻO LED kūlana, e uila ana i ka wā e kamaʻilio ai me ka PC
- 1000 VRMS kaawale kiʻekiʻe voltage (ST-LINK/V2-ISOL wale nō)
- Ka wela hana mai 0 a 50 °C
ʻIke kauoha
No ke kauoha ʻana i ka ST-LINK/V2, e nānā i ka Papa 1.
Papa 1. Ka papa inoa o nā code kauoha
| Kāhea helu | ST-LINK wehewehe |
| ST-LINK/V2 | Debugger/programmer in-circuit debugger |
| ST-LINK/V2-ISOL | In-circuit debugger/programmer me ka hoʻokaʻawale kikohoʻe |
a. Hiki i ka ST-LINK/V2 ke kamaʻilio me nā pahu hopu e hana ana ma lalo o 3.3 V, akā hana i nā hōʻailona puka ma kēia voltage pae. Hoʻomanawanui nā pahuhopu STM32 i kēia over-voltage. Inā noʻonoʻo kekahi mau mea ʻē aʻe o ka papa kuhikuhi, e hoʻohana iā ST-LINK/V2-ISOL, STLINK-V3MINIE a i ʻole STLINK-V3SET me B-STLINK-VOLT adapter e pale i ka hopena o ka over-vol.tage injection ma ka papa.
ʻIke huahana
Hōʻike ʻia nā kaula i hāʻawi ʻia i loko o ka huahana ma ka Figure 2 a me Figure 3. Aia lākou (mai ka hema a i ka ʻākau):
- USB maʻamau A i Mini-B uwea (A)
- ST-LINK/V2 ka hoʻopololei a me ka hoʻolālā (B)
- SWIM mea hoʻohui kumu kūʻai haʻahaʻa (C)
- ʻauʻau lipine pālahalaha me kahi mea hoʻohui ERNI maʻamau ma kekahi ʻaoʻao (D)
- JTAG a i ʻole SWD a me SWV lipine pālahalaha me kahi mea hoʻohui 20-pin (E)
Hoʻonohonoho lako lako
Hoʻolālā ʻia ka ST-LINK/V2 a puni ka mea STM32F103C8, kahi i hoʻokomo ʻia i ke kumu kiʻekiʻe Arm®(a) Cortex®-M3. Loaʻa iā ia ma kahi pūʻolo TQFP48.
E like me ka hōʻike ʻana ma ke Kiʻi 4, hāʻawi ka ST-LINK/V2 i ʻelua mau mea hoʻohui:
- he mea hoʻohui STM32 no ka JTAG/SWD a me SWV pili
- he mea hoʻohui STM8 no ke kikowaena SWIM
Hāʻawi ka ST-LINK/V2-ISOL i hoʻokahi mea hoʻohui no ka STM8 SWIM, STM32 JTAG/SWD, a me SWV mau pilina.
- A = STM32 JTAG a me ka mea hoʻohui SWD
- B = STM8 SWIM kumu hoʻohui
- C = STM8 ʻAuʻau, STM32 JTAG, a me ka mea hoʻohui SWD
- D = LED hana kamaʻilio
a. ʻO Arm kahi inoa inoa inoa o Arm Limited (a i ʻole kāna mau lālā) ma US a / a i ʻole ma kahi ʻē aʻe.
Pili me STM8
No ka hoʻomohala ʻana i nā noi e pili ana i nā microcontrollers STM8, hiki ke hoʻopili ʻia ka ST-LINK/V2 i ka papa kuhikuhi e nā kaula like ʻole ʻelua, ma muli o ka mea hoʻohui i loaʻa ma ka papa noi.
ʻO kēia mau kaula:
- he lipine palahalaha SWIM me kahi mea hoʻohui ERNI maʻamau ma kekahi kihi
- he uwea SWIM me nā mea hoʻohui 4-pin, 2.54 mm a i ʻole SWIM mau uwea kaʻawale.
ʻO ka pilina ERNI maʻamau me ka lipine palahalaha SWIM
Hōʻike ke kiʻi 5 pehea e hoʻopili ai i ka ST-LINK/V2 inā aia kahi mea hoʻohui ERNI 4-pin SWIM maʻamau ma ka papa noi.
- A = Papa noi hoʻolālā me ka mea hoʻohui ERNI
- B = Uea uwea me ka mea hoʻohui ERNI ma kekahi kihi
- C = STM8 SWIM kumu hoʻohui
- E nana i ke Kii 11
Hōʻike ka kiʻi 6 i ka nalo ʻana o ka pine 16 ma ka mea hoʻohui kiʻi ST-LINK/V2-ISOL. Hoʻohana ʻia kēia pine nalo ma ke ʻano he kī palekana ma ka mea hoʻopili uwea, e hōʻoiaʻiʻo i ke kūlana kūpono o ke kaula SWIM ma luna o ka mea hoʻopili pahuhopu a me nā pine, i hoʻohana ʻia no SWIM a me J.TAG uwea.
Hoʻohui SWIM kumu kūʻai haʻahaʻa
Hōʻike ke kiʻi 7 pehea e hoʻopili ai i ka ST-LINK/V2 inā loaʻa kahi mea hoʻohui SWIM 4-pin, 2.54 mm, kumu kūʻai haʻahaʻa ma ka papa noi.
- A = Papa noi hoʻopaʻa ʻia me 4-pin, 2.54 mm, mea hoʻohui kumu kūʻai haʻahaʻa
- B = Uea uwea me ka hookui 4-pin a i ole uwea kaawale
- C = STM8 SWIM kumu hoʻohui
- E nana i ke Kii 12
Nā hōʻailona SWIM a me nā pilina
Hōʻuluʻulu ka Papa 2 i nā inoa hōʻailona, nā hana, a me nā hōʻailona pili i ka wā e hoʻohana ai i ke kaula uea me kahi mea hoʻohui 4-pin.
Papa 2. ʻauʻau lipine palahalaha no ST-LINK/V2
| Pin no. | inoa | Hana | ʻO ka pilina pili |
| 1 | VDD | Manaʻo VCC (1) | MCU VCC |
| 2 | ʻIkepili | ʻAuʻau | Pin MCU SWIM |
| 3 | GND | AINA | GND |
| 4 | HOOLAHA HOU | HOOLAHA HOU | MCU RESET pine |
- Hoʻopili ʻia ka lako mana mai ka papa noi i ka ST-LINK/V2 debugging a me ka papa hoʻolālā e hōʻoia i ka hoʻohālikelike ʻana i ka hōʻailona ma waena o nā papa ʻelua.
Hōʻuluʻulu ka Papa 3 i nā inoa hōʻailona, nā hana, a me nā hōʻailona pili i ka hoʻohana ʻana i ke kaula uwea kaʻawale.
No ka mea, loaʻa i nā uwea kaʻawale SWIM nā mea hoʻohui kūʻokoʻa no nā pine a pau ma kekahi ʻaoʻao, hiki ke hoʻohui i ka ST-LINK/V2-ISOL i kahi papa noi me ka ʻole o kahi mea hoʻohui SWIM maʻamau. Ma kēia lipine palahalaha, ua kuhikuhi ʻia nā hōʻailona a pau e kahi kala kikoʻī a me kahi lepili e hoʻomāmā i ka pilina ma ka pahu hopu.
Papa 3. ʻAuʻau uwea kumu kūʻai haʻahaʻa pili no ST-LINK/V2-ISOL
| kalakala | inoa pine uwea | Hana | ʻO ka pilina pili |
| ʻulaʻula | CCTV | Manaʻo VCC (1) | MCU VCC |
| ʻōmaʻomaʻo | UART-RX | Hoʻohana ʻole ʻia | Mālama ʻia (2)
(ʻaʻole pili i ka papa kuhikuhi) |
| Polū | UART-TX | ||
| Melemele | PUA0 | ||
| Alani | ʻAuʻau | ʻAuʻau | Pin MCU SWIM |
| ʻeleʻele | GND | AINA | GND |
| Keʻokeʻo | ʻAuʻau-RST | HOOLAHA HOU | MCU RESET pine |
- Hoʻopili ʻia ka lako mana mai ka papa noi i ka ST-LINK/V2 debugging a me ka papa hoʻolālā e hōʻoia i ka hoʻohālikelike ʻana i ka hōʻailona ma waena o nā papa ʻelua.
- Mālama ʻia ʻo BOOT0, UART-TX a me UART-RX no nā hanana e hiki mai ana.
Hiki ke hoʻohui ʻia ʻo TVCC, SWIM, GND, a me SWIM-RST i kahi mea hoʻohui pitch 2.54 mm haʻahaʻa haʻahaʻa a i ʻole i nā poʻomanaʻo pine i loaʻa ma ka papa kuhikuhi.
Pili me STM32
No ka hoʻomohala ʻana i nā noi e pili ana i nā microcontrollers STM32, pono e hoʻopili ʻia ka ST LINK/V2 i ka noi me ka hoʻohana ʻana i ka 20-pin J maʻamau.TAG hāʻawi ʻia ka lipine pālahalaha.
Hōʻuluʻulu ʻia ka Papa 4 i nā inoa hōʻailona, nā hana, a me nā hōʻailona hoʻohui i hoʻopaʻa ʻia o ka 20-pin J maʻamau.TAG lipine palahalaha.
Papa 4. JTAG/SWD uwea pili
| Pin no. | ST-LINK/V2
mea hoʻohui (CN3) |
ST-LINK/V2
hana |
ʻO ka pilina pili (JTAG) | ʻO ka pilina pili (SWD) |
| 1 | VAPP | Kuhikuhi VCC | MCU VDD(1) | MCU VDD(1) |
| 2 | ||||
| 3 | TRST | JTAG TRST | JNTRST | GND(2) |
| 4 | GND(3) | GND(3) | GND(3)(4) | GND(3)(4) |
| 5 | TDI | JTAG TDO | JTDI | GND(2) |
| 6 | GND(3) | GND(3) | GND(3)(4) | GND(3)(4) |
| 7 | TMS_SWDIO | JTAG TMS, SW IO | JTMS | SWIDIO |
| 8 | GND(3) | GND(3) | GND(3)(4) | GND(3)(4) |
| 9 | TCK_SWCLK | JTAG TCK, SW CLK | JTCK | SWCLK |
| 10 | GND(5) | GND(5) | GND(4)(5) | GND(4)(5) |
| 11 | ʻAʻole pili | ʻAʻole pili | ʻAʻole pili | ʻAʻole pili |
| 12 | GND | GND | GND(4) | GND(4) |
| 13 | TDO_SWO | JTAG TDI, SWO | JTDO | TRACESWO(6) |
| 14 | GND(5) | GND(5) | GND(4)(5) | GND(4)(5) |
| 15 | NRST | NRST | NRST | NRST |
| 16 | GND(3) | GND(3) | GND(3)(4) | GND(3)(4) |
| 17 | ʻAʻole pili | ʻAʻole pili | ʻAʻole pili | ʻAʻole pili |
| 18 | GND | GND | GND(4) | GND(4) |
| 19 | VDD(3) | VDD (3.3 V)(3) | ʻAʻole pili | ʻAʻole pili |
| 20 | GND | GND | GND(4) | GND(4) |
- Hoʻopili ʻia ka lako mana mai ka papa noi i ka ST-LINK/V2 debugging a me ka papa hoʻolālā e hōʻoia i ka hoʻohālikelike ʻana i ka hōʻailona ma waena o nā papa.
- Hoʻohui iā GND no ka hoʻohaʻahaʻa ʻana i ka leo ma ka lipine.
- Loaʻa ma ST-LINK/V2 wale nō, ʻaʻole pili ma ST-LINK/V2-ISOL.
- Pono e hoʻopili ʻia kekahi o kēia mau pine i ka lepo no ka hana pololei, pono e hoʻopili iā lākou āpau.
- GND ma ST-LINK/V2, hoʻohana ʻia e SWIM ma ST-LINK/V2-ISOL (e nānā i ka Papa 3).
- Koho: no Serial Wire Viewer (SWV).
Hōʻike ke kiʻi 9 pehea e hoʻopili ai i ka ST-LINK/V2 i kahi pahuhopu me ka hoʻohana ʻana i ka JTAG uwea
- A = Papa noi hoʻopaʻa inoa me JTAG mea hoʻohui
- B = JTAG/SWD 20-uea palahalaha
- C = STM32 JTAG a me ka mea hoʻohui SWD
ʻO ka kuhikuhi ʻana o ka mea hoʻohui e pono ai ma ka papa noi i hoʻopaʻa ʻia: 2x10C poʻomanaʻo e uhi ana i 2x40C H3/9.5 (pitch 2.54) – HED20 SCOTT PHSD80.
Nānā: No nā noi kumu kūʻai haʻahaʻa, a i ʻole i ka nui o ka footprint connector 20-pin 2.54 mm-pitch maʻamau, hiki ke hoʻokō i ka Tag-Hoʻohui i ka hopena. ʻO ka Tag-E hoʻohui i ka adapter a me ke kaula i kahi ala maʻalahi a hilinaʻi hoʻi e hoʻopili ai iā ST-LINK/V2 a i ʻole ST-LINK/V2-ISOL i ka PCB me ka ʻole e koi i kahi mea pili i ka PCB noi.
No nā kikoʻī hou aku e pili ana i kēia hoʻonā a me ka ʻike noi-PCB-footprint, e kipa
www.tag-connect.com.
ʻO nā kuhikuhi o nā ʻāpana kūpono me JTAG a me nā pilina SWD:
a) TC2050-ARM2010 mea hoʻopili (20-pin- a 10-pin-papa waena)
b) TC2050-IDC a i ʻole TC2050-IDC-NL (ʻAʻohe wāwae) (10-pin uwea)
c) TC2050-CLIP paʻi paʻa no ka hoʻohana ʻana me TC2050-IDC-NL (koho)
LED kūlana ST-LINK/V2
Hōʻike ka LED i kapa ʻia ʻo COM ma luna o ka ST-LINK/V2 i ke kūlana ST-LINK/V2 (ʻo kēlā me kēia ʻano pili). I nā kikoʻī:
- Ke ʻālohilohi nei ʻo LED i ka RED: ke hana nei ka helu USB mua me ka PC
- He ʻulaʻula ka LED: hoʻokumu ʻia ke kamaʻilio ma waena o ka PC a me ST-LINK/V2 (hopena o ka helu ʻana)
- Ke ʻālohilohi nei ʻo LED i ka GREEN / RED: ua hoʻololi ʻia ka ʻikepili ma waena o ka pahuhopu a me ka PC
- ʻO LED ke GREEN: ua holomua ka kamaʻilio hope
- ʻO ORANGE ka LED: ʻAʻole i hāʻule ke kamaʻilio ST-LINK/V2 me ka pahu hopu.
Hoʻonohonoho polokalamu
Hoʻonui hou ʻia ʻo ST-LINK/V2
Hoʻokomo ka ST-LINK/V2 i kahi mīkini hoʻomaikaʻi firmware no ka hoʻomaikaʻi ʻana i loko o ka wahi ma o ke awa USB. E like me ka hiki ke hoʻololi ʻia ka firmware i ka wā o ke ola o ka huahana ST-LINK/V2 (hana hou, hoʻoponopono bug, kākoʻo no nā ʻohana microcontroller hou), ua ʻōlelo ʻia e kipa pinepine i nā ʻaoʻao i hoʻolaʻa ʻia ma. www.st.com e noho hou me ka mana hou loa.
Hoʻomohala noi STM8
E nānā iā ST toolset Pack24 me ka Patch 1 a i ʻole nā mea hou aʻe, e komo pū ana me ST Visual Develop (STVD) a me ST Visual Programmer (STVP).
Hoʻomohala polokalamu STM32 a me nā polokalamu uila
Kākoʻo nā kaulahao mea hana ʻekolu (IAR™ EWARM, Keil® MDK-ARM™) iā ST-LINK/V2 e like me nā mana i hāʻawi ʻia ma ka Papa 5 a i ʻole ka mana hou loa i loaʻa.
Papa 5. Pehea e kākoʻo ai nā kaulahao mea hana ʻekolu iā ST-LINK/V2
| ʻaoʻao ʻekolu | Mea paahana | Manao |
| IAR™ | EWARM | 6.20 |
| Keil® | MDK-ARM™ | 4.20 |
Pono ka ST-LINK/V2 i ka mea hoʻokele USB i hoʻolaʻa ʻia. Inā ʻaʻole hoʻokomo ʻokoʻa ka mea hoʻonohonoho hāmeʻa, hiki ke loaʻa ka mea hoʻokele ma www.st.com ma lalo o ka inoa STSW-LINK009.
No ka ʻike hou aku e pili ana i nā mea hana ʻekolu, e kipa i kēia webpaena:
Pānāika
- Kaao no ka wehewehe pine:
VDD = Voltage manao
DATA = SWIM DATA laina ma waena o ka pahuhopu a me ka mea hana debug
GND = Ground voltage
RESET = Hoʻihoʻi hou i ka ʻōnaehana pahuhopu
- Kaao no ka wehewehe pine:
VDD = Voltage manao
DATA = SWIM DATA laina ma waena o ka pahuhopu a me ka mea hana debug
GND = Ground voltage
RESET = Hoʻihoʻi hou i ka ʻōnaehana pahuhopu
Moʻolelo hoʻoponopono
Papa 6. Moolelo hooponopono palapala
| Lā | Hoʻoponopono | Nā hoʻololi |
| 22-ʻApelila-2011 | 1 | Hoʻokuʻu mua. |
| 03-Iun-2011 | 2 | Papa 2: Nā loulou lipine palahalaha ʻauʻau no ST-LINK/V2: hoʻohui ʻia ka footnote 1 i ka hana "Target VCC".
Papa 4: JTAG/SWD uwea pili: hoʻohui i ka footnote i ka hana "Target VCC". Papakaukau 5: Pehea ʻaoʻao ʻekolu nā kaulahao mea hana kākoʻo ST-LINK/V2: hōʻano hou i nā "Versions" o IAR a me Keil. |
| 19-ʻAukake-2011 | 3 | Hoʻohui i nā kikoʻī hoʻokele USB i Pauku 5.3. |
| 11-Mei-2012 | 4 | Hoʻohui ʻia ʻo SWD a me SWV iā JTAG nā hiʻohiʻona pili. Hoʻololi ʻia |
| 13-Sepatemaba-2012 | 5 | Hoʻohui ʻia ke code kauoha ST-LINK/V2-ISOL.
Hoʻohou Mahele 4.1: Hoʻomohala noi STM8 ma ka ʻaoʻao 15. Pākuʻi ʻŌlelo 6 in Papa 4. Hoʻohui ʻia "No nā noi haʻahaʻa haʻahaʻa ..." ma mua Mahele 3.3: Nā LED kūlana ST- LINK/V2 ma ka ʻaoʻao 14. |
| 18-ʻOkakopa-2012 | 6 | Hoʻohui ʻia Mahele 5.1: Hoʻomaikaʻi ʻia ʻo ST-LINK/V2 firmware ma ka ʻaoʻao 15. |
| 25-Mar-2016 | 7 | Ua hōʻano hou ʻia ka waiwai VRMS ma Hoʻolauna a i loko Nā hiʻohiʻona. |
| 18-ʻOkakopa-2018 | 8 | Hoʻohou Papa 4: JTAG/SWD uwea pili a me kona mau footnote. Nā hoʻoponopono kikokikona liʻiliʻi ma ka palapala holoʻokoʻa. |
| 09-Ian-2023 | 9 | Hoʻohou Hoʻolauna, Nā hiʻohiʻona, a Māhele 5.3: Palapala STM32 hoʻomohala a me nā polokalamu uila.
Hoʻohou Papa 5: Pehea e kākoʻo ai nā kaulahao mea hana ʻekolu iā ST-LINK/V2. Nā hoʻoponopono kikokikona liʻiliʻi ma ka palapala holoʻokoʻa. |
HOOLAHA NUI – HELUHELU ALOHA
Ua mālama ʻo STMicroelectronics NV a me kāna mau lālā ("ST") i ke kuleana e hoʻololi, hoʻoponopono, hoʻonui, hoʻololi, a me nā hoʻomaikaʻi ʻana i nā huahana ST a/a i kēia palapala i kēlā me kēia manawa me ka ʻole o ka ʻike. Pono nā mea kūʻai e loaʻa ka ʻike pili hou loa ma
Nā huahana ST ma mua o ke kau ʻana i nā kauoha. Kūʻai ʻia nā huahana ST e like me nā ʻōlelo a me nā kūlana kūʻai o ST ma kahi i ka manawa o ka ʻae ʻana i ke kauoha.
Na nā mea kūʻai aku ke kuleana no ke koho ʻana, koho ʻana, a me ka hoʻohana ʻana i nā huahana ST a ʻaʻohe kuleana o ST no ke kōkua noi a i ʻole ka hoʻolālā ʻana i nā huahana a nā mea kūʻai aku.
ʻAʻole hāʻawi ʻia ka laikini, hōʻike a i ʻole ka manaʻo, i kekahi kuleana waiwai naʻauao e ST ma ʻaneʻi.
ʻO ke kūʻai hou ʻana i nā huahana ST me nā mea ʻokoʻa mai ka ʻike i hōʻike ʻia ma ʻaneʻi e hoʻopau i kekahi palapala hōʻoia i hāʻawi ʻia e ST no ia huahana.
ʻO ST a me ka hōʻailona ST he mau hōʻailona o ST. No ka ʻike hou aku e pili ana i nā hōʻailona ST, e nānā i www.st.com/trademarks. ʻO nā inoa huahana ʻē aʻe a i ʻole nā inoa lawelawe ʻo ia ka waiwai o ko lākou mau mea nona.
Hoʻololi a hoʻololi ka ʻike i loko o kēia palapala i ka ʻike i hāʻawi mua ʻia ma nā mana mua o kēia palapala.
© 2023 STMicroelectronics – Ua mālama ʻia nā kuleana āpau
Palapala / Punawai
 |
STMicroelectronics ST-LINK/V2 Ma ka Papahana Debugger Kaapuni [pdf] Palapala Hoʻohana ST-LINK V2 Ma ka Kaapuni Debugger Programmer, ST-LINK V2, Ma ka Circuit Debugger Programmer, Circuit Debugger Programmer, Debugger Programmer, Programmer |
